SQIM 5589-8306 28-05-2020 V3 Power Juicer | SQ Professional Ltd © 2020 All rights reserved
Power Juicer Instruction Manual
Use & CaRe
BEFORE FIRST USE
ALL PARTS OF THE JUICER ARE TO BE THOROUGHLY CLEANED BEFORE
BEING USED FOR THE FIRST TIME (SEE THE SECTION ON CLEANING).
Carefully wash and dry all parts which come into contact with
food – juicer cover, food pusher, micro-mesh filter, juicing bowl, pulp
container and juice jug Wipe the motor block with a damp cloth and
dry immediately with a soft cloth assemble the appliance, take out the
required length of the cable and plug it into the mains supply
ASSEMBLY OF THE POWER JUICER
EXERCISE EXTREME CARE WHEN INSERTING OR REMOVING THE
MICRO-MESH FILTER. IT CONTAINS SMALL, VERY SHARP TEETH AND
A CUTTER ON ITS BASE.
1
Place the motor block
11
on a flat, stable surface and push the
interlocking safety arm
1
down Place the juicing bowl
12
on
the motor block
11
and attach the juice spout
2
image
1
2
Place the micro-mesh filter
4
over the mesh filter holder and
press down firmly until it snaps into place
image
2
3
Place the juicer cover
6
on the juicing bowl
12
with the feed chute
7
positioned centrally above the micro-mesh filter
4
image
3
4
Raise the interlocking safety arm
1
up and lock it into the
grooves on either side of the juicer cover
6
image
4
5
Tilt the pulp container
5
slightly forward and push it
upwards under the pulp spout
image
5
6
slide the food pusher
8
into the feed chute
7
by aligning
the grove on the pusher lift the cover on the juice jug
9
and
align the jug spout with the juice spout
2
image
6
DISASSEMBLING THE POWER JUICER
1
Turn the switch
10
to “
0
” and unplug from the mains supply
ensure that the appliance has come to a complete stop
2
Remove the pulp container
4
by holding it with both hands
and pivoting its lower end away from the juicer
3
Place both hands on either side of the interlocking safety arm
1
, pull back and lift over the grooves on either side of the
juicer cover, then lower it
4
Hold the juicing bowl
12
with both hands and lift it off the
motor block with the micro-mesh filter
4
still in place
5
Place the juicing bowl
12
into the sink and remove the juice
spout
2
Turn the juicing bowl upside down to remove the
micro-mesh filter
4
USING THE POWER JUICER
1
Wash the ingredients and remove any hard or inedible parts
(stones, pits, hard skin, rind, pith, etc )
2
ensure that the appliance is correctly assembled, the juice jug
9
is placed under the juice spout
2
, and pulp container
5
is in position before commencing juicing (the pulp container
can be lined with a bio-degradable or food-safe bag for easier
disposal or further consumption of the pulp)
3
Plug the cable to the mains supply and turn the power
ON
at
the power outlet
4
Place the ingredients into the feed chute
7
and turn the switch
10
to desired speed to switch the appliance on:
1 LOW SPEED
- for juicing soft fruit and vegetables such as
apricots, berries, cabbage, cauliflower, broccoli, cucumber,
grapes, kiwis, mangoes, oranges, pears, watermelons,
tomatoes, watermelons, etc
2
HIGH SPEED
- for juicing hard fruit and vegetables such as
apples, carrots, brussels sprout, fennel, plums, beetroot,
celery, etc
PULSE
SHORT BURSTS OF VERY HIGH SPEED
- for very hard
ingredients The switch does not permanently engage in
the ‘
PULSE
’ setting You have to hold the dial or turn it
repeatedly to the ‘
PULSE
’ setting
after juicing, always turn the switch to the ‘
0
’ setting and unplug
the appliance from the mains socket
5
With the motor running use the food pusher
8
to gently guide
food down and extract the maximum amount of juice The juice
will flow into the juice jug
9
and the pulp will separate and
accumulate in the pulp container
5
Do not use your fingers or
other utensils to push the ingredients down the chute
6
Do not allow the pulp container
5
to overfill as this may
prevent correct operation or cause damage to the appliance
To empty the pulp container during juicing, turn the Power
Juicer off by turning the switch to “
0
” and remove it as
described in disassembling instructions Replace the empty
pulp container
5
before continuing to juice
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
1
2
3
4
5
6
6
