background image

SQ PC 5673 / 5674 / 5675 21-05-18 | SQ Professional Ltd © 2018 All rights  reserved.

Meat Grinder

 Operation Manual

 

2

When using any electrical appliance, basic safety 

precautions should always be followed includ-

ing the following:

 1 

Read all instructions before using.

  2  To protect against risk of electrical shock 

do not put the unit in water or any other 

liquid.

 3 

Close supervision is necessary when any 

appliance is used around children.

 4 

Unplug from the mains socket when the 

appliance is not in use, or before putting on 

or taking off parts, and before cleaning. 

 5 

Avoid contact with moving parts.

 6 

This appliance has a polarised plug. To reduce 

the risk of electric shock, the plug will fit in a po

-

larised outlet only one way. Reverse the plug 

if it does not fit fully in the outlet. If it still does 

not fit, contact a qualified electrician. Do not 

modify the plug in any way.

 7 

Do not operate an appliance with a da-

maged cord or plug, or after the appli-

ance is dropped or damaged in any man-

ner. Return the appliance to the nearest 

autho-rised service facility for examina-

tion, repair or mechanical adjustment.

 8  The use of attachments is not recom-

men-ded by the manufacturer and may 

carry a risk of injury to persons.

 9 

Do not use outdoors.

 10 

Do not let the cord hang over the edge of a 

table or counter.

 11 

The cutting blade has very sharp edges. 

Take care when handling or cleaning it.

 12 

Always  turn  the  meat  grinder  off  after 

each use. Ensure the motor stops com-

pletely and unplug the power cord from 

the wall outlet before attempting to move 

the appliance, before cleaning, disassem-

bling, assembling and when storing the 

appliance.

 13 

Allow moving parts to come to a stop be-

fore changing or cleaning accessories.

 14 

Do not leave this appliance unattended 

during use.

15 

Never attempt to grind bones, nuts or 

other hard items.

 16 

Reverse function is prohibited while the 

appliance is operating, wait at least one mi-

nute until grinder has come to a complete 

stop to change function.

17 

Do not operate the appliance continuously 

with heavy loads for more than 10 minutes. 

Allow the motor to rest for 15 minutes be-

tween each use. 

18 

Do not immerse the grinder motor unit 

in water or any other liquid.

SAVE THESE INSTRUCTIONS

IMPORTANT SAFEGUARDS

Due to sharp parts and potential hazards the appliance is not suitable 
for the use of children under 8 years old. Even when off please, keep 
the appliance and cord out of the reach of children. Children over 8 
must be supervised by an adult at all times when using the appliance 
in any way. Children may not assemble the product or touch the sharp 
blades at any times to prevent against  accidents.

 

This is not a toy!

 

The appliance can be used by persons with reduced physical, sensory 
or mental capabilities if they have been given supervision and 
instruction and understand the use and hazards involved. 

Summary of Contents for 5673









Reviews: