5
• Attaching the Hand Strap
• Installing the battery
A piece of rechargeable Li-polymer battery is supplied with the camera.
1. Open the camera battery door by pushing it outwards as illustrated.
2. Insert the battery as shown, ensuring you follow the +/- signs on outside of the battery slot.
3. Close the battery door by pressing it downwards then slide it back to lock.
• Charging the Battery
Please fully charge the battery for up to ten hours before you use the camera for the first time after
purchased. Follow the following steps to charge and recharge the battery.
Using USB cable via computer
1. Plug the end labelled
of the USB cable into the socket marked
on your computer.
2. Plug the other end of the USB cable into the USB port on the camera.
3. The battery charge indicators will blink in turn when the battery is charging, and they will all keep on
when the battery charging completes.
4. It takes approximately three hours to fully recharge the battery each time.
NOTE:
• The new hardware wizard launches when the camera is connected with a computer that has not installed the software
supplied. Please leave the camera connected and ignore the new hardware wizard when you recharge the camera.
• If you have already installed the software supplied on you computer, the camera will become a PC camera when
connected to the computer for recharging.
Summary of Contents for zemo
Page 1: ...User s Manual zemo ...