1008754 Rev. A
17
7. Plug in Battery Harness connector to the Variable
Speed Control (3).
Variable Speed
Control
Black
Black
Black
Red
Red
Red
Red
8. Route Battery Harness to battery, and use Cable
Ties (17) to properly secure to vehicle. Be sure
to route wires away from hot surfaces, gas tank fi ll
areas, or areas that could cause tripping hazard.
Mount Variable Speed
Control Here
ZTR
SUGGESTION
Fasten with
Cable Ties
UTV
SUGGESTION
Route Beneath
Bed
Route Around
Seat
Mount
Variable
Speed
Control Here
9. Connect the red positive (+) wire of battery harness
to positive (+) clamp bolt of battery. Install and
tighten nut completely, and slide red battery boot
onto positive battery cable post.
10. Connect black negative (-) battery harness to black
negative (-) of battery clamp bolt. Install and tighten
nut completely.