14
MicroSD Card Recording:
The system records video to the microSD card (not included). You can
manually start or stop recording at any time by pressing the record button,
or enable motion record so the LCD receiver will automatically record only
when motion is detected by the camera, or schedule recording based on
the scheduled you set for each camera. Before recording, you need to insert
a microSD card to the microSD card slot. The system can support up to
64GB microSD card.
Recording Prerequisites: A microSD card must be inserted into the
receiver in order to record video. You should always format the microSD
card prior to initial recording.
The following recording modes are available on the system: manual
recording, schedule recording, and motion recording. Record up to 4
channels at the same time.
3.1 Motion Recording
System only records when motion is detected by a camera(s). Press Motion
( ) on the front panel of the receiver to start motion recording. There is a
red man ( ) on the bottom right of corner. In this mode the receiver starts
recording prior to 5 seconds when motion detected by any activated
camera. The recording time can be set to 15s, 30s or 1 minute after last
detection. (Receiver support recording 4 camera at the same time in quad
mode)
Press Motion again or press Rec to stop recording, after stopping recording
press Motion to cancel automatic recording mode.
USING THE SYSTEM
1DVRDIG1503
