45
5.6.7 Motion Detection
To access the “Motion Detection”
menu, in the toolbar, first
click
“System Settings,” then click Alarm.”
Next, select “Motion” and click “>>,”
and the dialog window where
Sensitivity, MD Detection, Output,
Record, Buzzer, Prerecord, and email
settings can be set will appear.
CHANNEL
: In this field, select the
channel to be set up.
SWITCH
: Each channel has a corresponding channel switch; press “Enter” to turn the motion
detection for each channel on or off.
SENSITIVITY
: Each channel has a specific sensitivity setting; there are eight levels, with “1”
being the highest level of sensitivity; press “Enter” to adjust the level.
MD AREA
: Sometimes, it is necessary to have some regions in the camera’s coverage area
enabled with the motion detection feature, while other regions in the same coverage area do not
require this functionality. This may be handy when, for example, the camera covers the road
and an adjoining area. While it would be useful to have the motion detection enabled on the
area near the entrance to a building, it would most likely not be helpful to see it triggered every
time a car or truck passes by on the nearby road. Each channel has a specific regional motion
detecting setting.
To enter the “Regional Setting” menu, move the cursor
to “setting” and then press “Enter.” When viewing the
selected channel’s coverage area using the MD Area
option, the blue area is where motion detection is
activated, and transparent block is the area where
motion detection is not activated.
Press the direction keys on the remote control to move
the cursor along the small pane: the position of cursor is
indicated by a green frame. Press “Enter” to select or
cancel motion detection in this small pane. When the
setup is finished, press”
“or right click to return to the MD setup menu and click “
”
to save the settings.
Note:
Mouse operation: Left-click and drag the frame to set up the region for motion detection.
OUTPUT
:
“
¥
” indicates that an alarm will be activated if it has been triggered by motion.
RECORD
:
“
¥
” indicates that the selected channel will record if it has been triggered by
motion.
BUZZER
:
“
¥
” indicates that the buzzer will sound if it has been triggered by motion.
Summary of Contents for PKDIG
Page 1: ......
