11
Pin NO-COM: Alarm Output (N.O) Pin A
Ε
Pin B: RS-485A
Ε
RS-485B
In device operation, the enter key on remote control or front panel has the same function as left
click of the mouse.
3.3 Wireless Camera (Transmitter)
1. Camera Mounting Bracket
1. Camera Mounting Bracket
2. Power connector DC 12V/1A
3. CDS control for day and night vision
4. 36 IR LEDs to provide infrared light for night vision
5. 1/4
ϣ
CMOS Color image sensor
6. Power indication LED
7. Rainproof solid aluminum housing
8. 2.4GHz Antenna
3.3.1 How to pair the wireless camera (transmitter) and wireless DVR
(receiver)
Before shipment of this product has been paring ID code, you can instantly use. If you want to
re-pair your code, you have to comply with the following instructions to the paring code. Please
see the follow pairing operation.
After connecting the video output of the wireless DVR and the video input of TV or monitor
with a video cable then the first remove two waterproof plastic caps on the rear of the wireless
camera, and then cover the waterproof plastic cap tightly. Turning on the power switch of
wireless camera, wireless DVR and TV or monitor, and then you can press the PAIR button on
the rear of the wireless DVR and instantly release. The TV or monitor screen will show “Please
press paring key on camera side “, and then countdown to 30 seconds, meaning that in 30
seconds, you have to press the paring button on the rear of the wireless camera (TX device),
otherwise it will show “no signal ”. When you press the paring button on the rear of the
wireless camera and instantly release ,wireless camera starts to enter the pairing state and
automatically link ID code to the wireless DVR. When the paring is successful, The TV or
monitor screen will show “correct image “.That means they have completed the pairing of work,
and you can watch the video was transmitted by the wireless camera on the TV or monitor
screen, and then cover another waterproof plastic cap tightly.
Summary of Contents for PKDIG
Page 1: ......
