Record Audio
There are settings to enable or disable audio recording available from the menu by
selecting the Record Audio option and navigating using the Up and Down buttons to
choose either On or Off. In Off mode, only video is recorded and in On mode, both
audio and video are recorded. Once the On or Off option is highlighted, press the
REC button to save the selection.
G-Sensor
The G-Sensor stabilizes the image in the event that a wreck or other physical
disturbance occurs. The G-Sensor prevents any recorded footage during a physical
disturbance from being lost by not allowing Loop mode to have effect, thus not
allowing the device to record over the footage by proceeding with regular, continual
recording. To access G-Sensor settings, select G-Sensor from the Menu and use the
Up and Down buttons to navigate settings: On, Off, High, Medium or Low. The High
settings will detect slight physical disturbance whereas Low will detect only major
physical disturbance. Press the REC button.
Date Stamp
The date stamp may be enabled or disabled by selecting Date Stamp from the
menu. Select either On or Off and press the REC button to save changes.
Set the Time and Date
To set the time and date, use the Up and Down buttons to select the System Setup
icon (last on the right) of the settings menu and press the REC button. Here Time
and Date are listed with an arrow pointing to changeable values. Use the Up and
Down buttons to adjust the values. After you have found the correct value for the
year, press the REC button. Now, you can adjust the Date Format by pressing the Up
and Down buttons. Press the REC button after selecting the desired format.
Adding License Number Set to Timestamp
To add a license number to the timestamp, use the Up and Down buttons to select
the License Number icon of the settings menu and press the REC button. There is a
character for each row in this setting. Use the Up and Down buttons on the left of
the screen to find the appropriate character and press the REC button to adjust the
next character. Press the REC button after selecting the desired format.
Auto Power Off
By selecting Auto Power Off in the menu, the camera is able to set off automatically
after 3 Minutes, 5 Minutes or 10 Minutes. This may be disabled by selecting Off in
the menu. After highlighting the selection, press the REC button to update settings.
Spy Tec
www.spytecinc.com
Spy Tec
www.spytecinc.com
9
Video Settings Menu
