Spy Tec
www.spytecinc.com
Spy Tec
www.spytecinc.com
12
White Balance
There are settings to enhance white balance available from the menu by selecting
the White Balance option and navigating using the Up and Down buttons to choose
either Auto, Daylight, Cloudy, Tungsten or Flourescent. In Auto mode, settings will
adjust themselves to changes in lighting. In Daylight mode, settings will allow greater
clarity for footage taken in daylight as with Cloudy settings for cloudy conditions.
The Tungsten mode is best for basic indoor use, whereas the Flourescent setting
adds brightness and warmth to the indoor image. Once the desired option is
highlighted, press the REC button to save the selection.
Color
To change the color of images, select the Color option and use the Up and Down
arrow buttons to the left of the screen to choose Normal, Black and White, or Sepia
(reddish brown effect). Press the REC button to finalize the selection.
ISO
The ISO settings allow for greater or lesser allowance of incoming light and may be
accessed by selecting ISO from the menu. In certain lighting conditions, a higher ISO
setting may create undesirable noise. Select either Auto, 100, 200 or 400 and press
the REC button to save changes.
Exposure
The exposure settings allow you to adjust the picture quality by enabling a certain
amount of light to pass through a unit area of the lens. By adding more value, the
greater the amount of light to pass through the camera as it is filming or taking still
photos and likewise, the lesser the value will give lesser light to the capture. Settings
may be set higher for nighttime to reduce glare and lower for daytime to get similar
results. Settings for exposure are as follows: -2.0, -1.0, -1/3, -2/3, -4/3, -5/3, +0.0,
+5/3, +4/3, +2/3, +1/3, +1.0 and +2.0. To adjust exposure, select the Exposure option
from the Menu and navigate using the Up and Down buttons to the left of the
screen to select On or Off and press the REC button.
Anti-Shaking
The Anti-Shaking settings allow for image stabilization when physical interference
occurs. Select either On or Off and press the REC button to save changes.
HDR
This setting is not accessible.
Date Stamp
The date stamp may be enabled or disabled by selecting Date Stamp from the
menu. Select either On or Off and press the REC button to save changes.
