22
To prevent the possibility of contaminating the sensor in
your detector and thus affecting its reliability:
• Never use cleaning solutions on your detector Simply
wipe with a slightly damp cloth
• Do not paint the detector
• Do not spray aerosols on or near the detector
• Do not use any solvent based products near the
detector
If installing in a caravan or a boat there maybe other
substances present, that may not normally be found
in the home, that could effect the reliability of the CO
alarm Avoid using the following in close proximity to
the alarm; oils, cleaning fluids, polishes, paints and
greases
• Move the detector to a safe location and store in
a plastic bag before painting, wall papering, or
performing any other activities using substances that
emit strong fumes Remember to remove it from the
bag and replace the detector when these activities are
finished
• Do not attempt to repair your CO detector Do not
remove any screws or open the main casing of your
detector Any attempt to do so may cause malfunction
and will invalidate the warranty
