16
To deactivate the detector the two ends of the metal clip
must be inserted into the corresponding holes in the
disabling socket located on the underside of the detector
You can ensure that the product is disabled by pressing
the test button - if there is no sound from the sounder then
the clip has been fitted correctly
NOTE:
If the disabling tab is no longer available then the
clip can be replicated by opening out a thin metal paper
clip into a U-shape
OPERATING FEATURES
Your detector offers many features which set it apart from
other CO detectors on the market today:
Test/Silence button feature
• Tests the sounder, power pack and circuitry
• Allows you to test the sensor by introducing a source
of CO into the detector
• Silences the loud 85dB (at 1 metre (3 feet)) sounder
during an alarm (only for alarms due to levels of CO of
less than 50ppm)
Testing the sounder, power pack and circuitry
Test the sounder, power pack and circuitry by pressing
and releasing the Test/Silence button to confirm that the
detector is operating properly The sounder should sound
as soon as the button is pressed, and the Alarm LED will
illuminate red indicating that the sounder is working
and the power pack is providing power to the unit This
