SPRT SP-RMDIIID, User Manual

Page: 17 / 61

15
3
－
4
self-test receipt
In the figure, the left one is self-test receipt for serial interface model and
the right one is for parallel interface model. The printing sequence is from the
below to above.
Mark:
1,
Due to that the default configuration item may be different when the
printer is out of factory, the font size of self-test receipt and the content of each
configuration is according to the actual content of printed receipt. The above
picture is just for reference.
2,
The specific content of each item set can reference "3.1.3 printer
parameters setting" section. After setting manually each time, it can be test
whether the setting is successfully through printing self-test receipt.
Self-test method:
1,
Hold down the "SEL" button and turn on the printer, then loosen the
button, the printer will print out the self-test list.
2, Under normal w
orking mode, click SEL button once, then hold down the