SPRT SP-RMDIIID, User Manual

Page: 13 / 61

11
time, red indicator will flash once one second. Release
【
LF
】
button within three flashes.
The printer enters into setting status and print related message. Choose the setting item
through
【
SEL
】
button. Press
【
SEL
】
button once, the setting item will go to the next and
print out the setting value of this item. Choose the setting value of item through
【
LF
】
button. Press
【
LF
】
button once, the setting item will go to the next.
Exit the parameter Settings: press the
【
LF
】
button, then press
【
SEL
】
button, release
【
LF
】
button and
【
SEL
】
button, print out “Exit Set Mode” notice message. Now the set
parameters have been saved. Exit the setting mode and enter into normal working. If you
close the power supply of printer directly, the setting parameter will lose.
Summary setting(when Parallel interface there is no baud rate and Serial interface
format setting items) :
1, Baud Rate:
2, Data bit / Handshaking / Parity:
Instructions:
Data Bit: 8bit or 7