SPRT SP-RMD8, User Manual

Page: 23 / 48

20
ESC P Set Character Space
Format: ASCII: ESC P n
Decimal: 27 112 n
Hexadecimal: 1B 70 n
Explanation:
This command is used to set space dot between characters, which is also valid for
Chinese characters.
Default n=0, means no space between characters. (dot is absolute value and won’t be
influenced by enlarging or narrow commands), n=0~255
4.2.3 Character Setting Commands
ESC U Enlarge Width
Format: ASCII: ESC U n
Decimal: 27 85 n
Hexadecimal: 1B 55 n
Explanation:
After inputting this command, the characters, graphics and Chinese characters are printed
at n times of normal width, n=1
～
8. Default n=1 when the dots are 24, while default n=2
when the dots are 16. These are normal printing width.
Remark: n=1
～
8, the other value of n will be invalid.
The BASIC programs for observing the enlarging effect of this command are as below:
FOR I=1 TO 3
LPRINT “CHR$ (27); CHR$ (85);CHR$ (I); ’ESC U command LPRINT “SPRM”;
’Print
character string NEXTI ’CR command
The print result is as following:
ESC V Enlarge Height
Format: ASCII: ESC V n
Decimal: 27 86 n
Hexadecimal: 1B 56 n
Explanation:
After inputting this command, the characters, graphics and Chinese characters are printed
at n times of normal height, n=1
～
8. Default n=1 when the dots are 24, while default n=2
when the dots are 16. This command should be sent out at the beginning of one line.