SPRT SP-RMD8 Page 5 User Manual Download

Page: 5 / 48

Chapter 1 Feature and Performance

1.1 Feature

◇

Thermal line printing.

◇

Printing head and circuit together to be convenient for installation.

◇

With single chip processor. There is standard parallel interface or serial

interface, which is convenient to connect with kinds of microcomputers or
intelligent equipment.

◇

There is actual time printing command to print Characters, code, graphics,

etc. The commands set is compatible with the traditional printer.

◇

Support kinds of codepages and pre-saved bitmap printing.

◇

Self-testing function. All codes can be printed, characters with high

definition and beauty.

◇

Enough receiving buffer 3K.

◇

Front installation to be convenient for customers to install.

◇

Printing paper: Width 57.5±0.5mm thermal paper.

◇

Power request: Broad Input Voltage: DC5V

～

8.5V Current: 3A.

◇

Operating temperature: 0

～

℃

◇

Can be used in DOS and Windows.

◇

8dots/mm, 384dots/line.

◇

Printing speed: 30mm/s.

◇

Outline dimension(mm): W × H × D, please refer to figure 2-2~ figure 2-4

of chapter.

1.2 Performance

◇

Printing method: thermal line printing.

◇

Interface: Parallel (CENTRONICS compatible) or Serial (RS-232

、

TTL or

RS-485).

Summary of Contents for SP-RMD8

















































Search results

Summary of Contents for SP-RMD8

Reviews:

Related manuals for SP-RMD8

Brands by name

Popular brands

SPRT SP-RMD8, User Manual

Search results

Summary of Contents for SP-RMD8

Reviews:

Related manuals for SP-RMD8

Brands by name

Popular brands