Sprint TX340G, User Manual, Page: 21 / 41

TX340G User Manual
Sound
Adjusting Voice Volume
You can control the volume level of the terminal.
1. Pick up the handset and listen to the dial-tone.
2. Press **11* to raise the voice volume.
3. Press **11# to lower the voice volume.
4. A confirmation beep will sound.
Adjusting Alert Tone Volume
1. Pick up the handset.
2. Press **12* to raise the alert tone volume.
3. Press **12# to lower the alert tone volume.
Setting One Minute Alert
When this feature is enabled, a discrete tone is generated at each
one minute interval on the receiver during a conversation for both
incoming and outgoing calls. This tone is to help the user keep
track of the phone usage. To change the setting:
1. Pick up the handset.
2. Press **13# to enable the feature.
3. Press **13* to disable the feature.
Setting Voice Privacy Alert
If enabled, a beep is generated when Voice Privacy is on.
To change the setting:
1. Pick up the handset.
2. Press **14# to enable the feature.
3. Press **14* to disable the feature.
Setting Connection Alert
If enabled, a discrete tone is generated on the receiver when a call is
connected.
To change the setting:
1. Pick up the handset.
2. Press **15# to enable the feature.
3. Press **15* to disable the feature.
NOTE 1: Some phones may have their own volume control.
Use both the terminal and the phone volume controls to
optimize the sound level.
NOTE 2: Volume cannot be adjusted while a conversation is in
progress.
NOTE: The default setting may depend on the service provider.