Sprint TX340G, User Manual

Page: 20 / 41

TX340G User Manual
Making Calls
1. Check if the terminal is turned on.
2. Pick up the handset of the phone.
3. If you hear a dial tone, dial the desired telephone number by using the
wired or cordless telephone’s keypad.
4. Wait for about 3 seconds until the call is automatically processed by
the terminal. (Auto Dial Time can be configured from 3 seconds to 9
seconds, or turned-off).
5. When the other recipient answers, begin conversation.
6. To hang up, put the phone receiver back on the phone hook or press
the TALK or OFF button on your phone.
Receiving Calls
The wired or cordless telephone(s) connected to the terminal ring
when an incoming call comes in.
1. Pick up the phone receiver to answer the call.
2. To disconnect after the call is finished, place the handset on the phone
hook or press the TALK or OFF
button on your phone.
NOTE: You can dial a phone number with a maximum of 32 digits,
including * and #.
NOTE: If “# as Send Key” feature is enabled, press the # button to
process the call immediately after entering the dialed number.
Default setting is OFF. Please refer to the page 14 for “Using # as
Send Key”.
NOTE: If Connection Alert is turned on, a beep is heard when the
call is connected. The default setting is OFF.
NOTE 1: If using cordless phone, press TALK or OFF button to
answer the phone call. Refer to the cordless phone user manual for
instruction.
NOTE 2: Make sure that the attached telephone(s) ringers are
enabled.