Troubleshooting
32
Setting the AIRAVE to factory defaults
RESET buttons
The AIRAVE has 2 RESET buttons on the bottom of the unit, as shown in the following diagram.
Voice Services
Pressing the
Voice Services
RESET button for more than 4 seconds sets the cFAP back to factory
defaults.
NOTE
: During this reset, LTE Data services should not be impacted if the LTE Data service is up.
Data Services
Pressing the
Data Services
RESET button for more than 4 seconds sets the S1000 back to factory
defaults.
NOTE
: During this reset, Voice services will be impacted.
When to do a reset
If your AIRAVE operates properly for an extended period and the WAN LED on either side of the device
starts blinking red, the AIRAVE may have a problem requiring a reset.
If the WAN LED on the DATA side of the device suddenly starts blinking red, the S1000 may have a
problem requiring a reset. Press the
Data Services
RESET button for more than 4 seconds to invoke a
factory default of the S1000.
Wait at least 10 to 15 minutes after the reset for the S1000 to be fully
functional.
