Testing the System
38) While the water is still off
to the home, open a cold
bathtub faucet all the way.
39) Before turning on the water to
the home ensure the shut off valve
to the system is in the off position.
42) If no leaks are detected,
open the shut off valve to allow
water flow through the tank
bypass.
44) Allow water to run through
the system for 10 minutes. It is
normal to see a small amount of
sediment during this time.
Questions? Call (800)-589-5592
10
Bypass
41) Turn on the water to the
home and inspect the shut off
valve for any leaks.
43) If no leaks are detected
from the bypass, turn off the
bypass to the well water filter
and allow water to flow
through it.
40) Ensure that the valves on
the tank is set to bypass.
Off
Well Water Filter System