Spotwave spotcell 100, User Manual, Page: 18 / 60

I
NSTALLATION
12
SpotCell® 100 Series
3.4 Positioning the CU
1. Ensure that the DU position has been optimized and has been mounted in place.
2. Move the mode switch on the CU from ‘Install’ to ‘Active’.
3. Hold the CU in the position it is to be mounted. Ideally the display on the CU will
show 5 bars for coverage area.
If it is not showing 5 bars for coverage area and there are alternate mounting
locations, move the CU to the alternate locations and check the display. Place the
CU in the location showing maximum number of bars.
Note: Each time the CU is moved, wait approximately 25 seconds for the coverage area bars
(
) to stabilize.
4.
If the number of bars is not changing, which is very possible, choose a CU mounting
location that is convenient for the area requiring coverage.
5. Refer to Chapter for mounting instructions.
3.5 Auxiliary Antenna
The SpotCell Coverage Extension kit (purchased separately) can extend coverage into
hard to reach places that are blocked by obstructions such as dense walls or shadowed
by elevator shafts or ductwork.
Instructions for connecting and mounting the auxiliary antenna are included in the
Coverage Extension (CE) kit. A CE will provide coverage for an area about 25% of that
provided by the CU.
Auxiliary
antenna
connection