Spotwave spotcell 100, User Manual, Page: 15 / 60

I
NSTALLATION
SpotCell® 100 Series
9
Note: Only use the power supply provided with the SpotCell system. Connecting a power supply
from another SpotCell system may damage the unit and cause it to fail.
5.
Ensure the mode switch on the CU is in the ‘Install’ (1) position.
For dual band systems (SC141/SC142) set the band select switch to 800 MHZ.
Figure 3.5: CU witch locations
6. Plug the power supply adapter into a wall socket.
7.
Alignment Step 1
. Hold the DU upright and pointing away from you. If installing a dual band system
(SC141/142), ensure you are holding the 800 MHZ DU.
Ignore the color of the LED on the back of the DU, while:
Indoor DU Outdoor DU On a Roof Outdoor DU on an External
Wall
Rotating the DU left to right
with the DU facing to the
outside through the window.
If not in front of a window,
rotate the DU in a complete
360° circle (see roof location
diagram).
Rotating the DU in a
complete 360° circle.
Rotating the DU left to
right with the DU facing
away from the exterior
wall.
163 iDEN & 167 Product Only. For the 163 & 167 products, the LED on the DU flashes.
When rotating the DU from time to time the flashing will stop and the LED turns OFF,
when this occurs momentarily pause the rotation then resume when flashing restarts.
mode
switch
band
select
switch
Window or
Exterior Wall
Exterior Wall