38
1.
Set the rear triangle assembly on one side, on a work bench with a protective cloth to prevent
scratching the frame finish. Support the pivot yoke as shown by your 27
-
30mm ID plastic tube.
Combine your 20
-
22mm outer diameter socket with an extension, punch, or other implement as
shown. Begin gently tapping with the hammer to push the bearing out of the frame and into the tube:
Main Pivot Bearing Replacement
2.
Remove the remaining main pivot bearing by flipping the rear triangle over and repeating.
Summary of Contents for Mayhem 130
Page 1: ...1 MY21 Mayhem 130 Frames Assembly Instructions and Maintenance Manual ...
Page 9: ...9 2 Use the open end of the wrench to turn the adjuster cap 180 Either direction will work ...
Page 54: ...54 Mayhem 130 150 Frame Parts Reference ...
