24
1.
Secure the bike/frame in a work stand and remove the rear wheel from the frame. This will
make access to the rear shock mounting hardware easier in step 5.
2.
Using a T30 Torx tool on the non
-
drive side, remove the forward shock pivot pin and screw.
Rear Shock Removal/Replacement
3.
Swing the shock downward from its forward mount being careful not to collide the shock with the
down tube
4.
Swing the shock to the drive side of the frame for better access to the rear mounting hardware. You
will feel some resistance if the rear mounting hardware is torqued to spec.
Summary of Contents for Mayhem 130
Page 1: ...1 MY21 Mayhem 130 Frames Assembly Instructions and Maintenance Manual ...
Page 9: ...9 2 Use the open end of the wrench to turn the adjuster cap 180 Either direction will work ...
Page 54: ...54 Mayhem 130 150 Frame Parts Reference ...
