SPOT Global Phone User Manual Download

Page: 79 / 118

Preferences Menu

■

Minute

■

Service change

■

New message

Fade

The fade alert occurs when any network drops a call.

To set the fade alert

From standby mode, press

menu

Press

Preferences.

Press

Alerts.

Press

Fade.

Press

to select “on.” Press again to select “off.”

Press

Minute

The minute alert occurs ten seconds before the end of every minute.

To set the minute alert

From standby mode, press

menu

Press

Preferences.

Press

Alerts.

Press

Minute.

Press

to select “on.” Press again to select “off.”

Press

Service Change

The service change alert occurs when the phone enters or leaves service.
This alert displays a message and can also be configured to sound a tone.

00-80-C6302-2.book Page 71 Tuesday, August 22, 2006 3:31 PM

Summary of Contents for Global Phone























































































































Search results

Summary of Contents for Global Phone

Reviews:

Related manuals for Global Phone

Brands by name

Popular brands

SPOT Global Phone, User Manual

Search results

Summary of Contents for Global Phone

Reviews:

Related manuals for Global Phone

Brands by name

Popular brands