3
IMPORTANTWARNINGS AND INSTRUCTIONS
Safety Information
BEFORE YOU BEGIN ASSEMBLY:
Take a complete inventory of components using the parts list.
Sort and lay out the wood pieces. Label each piece of wood for easy reference. For easy
identification during the assembly process, write the board’s letter on masking tape and adhere to
each piece of the wood. Some wooden components may twist or warp in the carton after packaging.
Usually, these parts straighten out when assembled. You may also see some cracking of the grain.
This is normal.
Sort all hardware according to size. Do not worry if extra hardware is included.
FIND A SAFE PLAY LOCATION.
You MUST install the product on level ground. Uneven ground must be leveled prior to installation.
The manufacturer cannot assume responsibility for any failure from incorrect installation.
Installing on sloping ground will put stress on all the joints, which will cause the set to become loose
and unstable.
Find a location where the equipment can be placed more than 2 meters from any structure or
obstruction (ex: electrical wires, branches, house, fence, garage). The safe play area refers to a zone
extending 2 meters beyond the gym set on all sides, including the space above the play set.
The safe play area must be free of all structures, landscaping, tress and branches, rocks, wires and
other obstacles to safe play. Children can be seriously injured running into these obstacles.
Remove any rocks or any jagged or sharp object that could endanger your children’s’ safety.
Remove all tripping hazards from the safe play area. Tripping hazards include but are not limited to:
roots, stumps, rocks, landscaping, sprinkler heads, railroad ties, plumbing, and electrical
connections.
Do NOT install your play set over gravel, asphalt, packed earth or any other hard surface.
Important –Please read these instructions thoroughly before assembly or use.
