background image

SP-26-WP-753-STUDIO-20001

Care and Maintenance

If correct care and maintenance is provided, 

it will provide users with years of exercise, 

fun and enjoyment.

This Wooden Playhouse was designed and 

manufactured with quality materials and 

craftsmanship. 

For outdoor use only. To be played in an open area with 
adult supervision. This product is designed to be used 
safely by up to 2 children. For family domestic use only. As 
an extra precaution, check this product regularly for signs 
of wear or damage. Packaging materials are not toys. Please 
remove all packaging and packing tags/wires before 
allowing children to use. Maintenance to be carried out 
under the direct supervision of a responsible adult. Colour, 
designs and decorations may vary from those shown in the 
photographs. 

Please carry out checks and maintenance of the main 

parts before each use. If these checks are not carried out 

the product could overture or otherwise become a hazard. 

It is of particular importance that they be followed at the 

beginning of each season as well as at regular intervals 

during the usage season.
Check all nuts and bolts for tightness and tighten when 

required; Check all coverings for bolt and sharp edges 

and replace when required; Replace when required in 

accordance with the manufacture’s instructions. 
Do not use when temperature drop below 32 degree F.(0 

degree C). 

What to Inspect:

Hardware: 

Inspect all screws and tighten if required. Hardware should be firmly against, but not crushing the 
wood. Over-tightening hardware crushes wood fibers and can split wooden components resulting in the 
screw  thread  extending  beyond  the  wood.  This  poses  a  severe  safety  hazard.  If  screw  threads  protrude 
beyond  the  wood  surface,  replace  the  screw  with  a  shorter  one  that  will  not  protrude.  If  splintering  has 
occurred  from  over-tightening,  larger  washers  can  be  purchased  at  your  local  hardware  store  and 
installed under the screw head. 

Major Wooden Parts: 

Inspect for structural defects and splintering. If necessary, lightly sand and refinish with an exterior water 
repellent stain. Seasonal cracking of the grain on wooden parts is quite natural. Water and heat are the 
most frequent causes of expansion and contraction of wood fibers. Our wood set has been treated with 

stain to resist weathering, but it needs to be maintained periodically by applying new stain or paint. 

Inspect for structural defects and splintering. If necessary, lightly sand and refinish with a clear water 
repellent, exterior sealant or boiled linseed oil. Do NOT paint, varnish or finish rungs with any substance 
that may reduce your child’s ability to firmly grasp or step on the rungs.   

Play Area   

Inspect to assure that the play house has settled properly and the location of the set is still level. 

WARNING!  Not  suitable  for 

children under 3 years due to 

small parts, chocking hazard.

12

Importer's name Retail Marketing Service GmbH 

Importer's address Besselstr. 25 68219 Mannheim Germany 

Importer's name Geemac Sales & Marketing Ltd

Importer's address 4 Summerhouse Place, Summerhouse Road, Moulton Park Industrial Estate 

Northampton, United Kingdon, NN3 6GL. 

Summary of Contents for PERSONALISED WOODEN PLAYHOUSE














Reviews: