45
MAINTENANCE
Lubrication
Please follow instructions (a) through (h) to lubricate the product.
(a) Remove the cap that covers the lubrication hole.
(b) Use an automobile grease gun to apply red lithium bearing grease into
the zerk fitting on the product.
(c) After applying lubricant, detach and remove the grease gun.
(d) Insert the cap back into place.
(e) Push in at point A, and slide upward to remove the lubrication hole cover.
(f) Press the stride up key to adjust the stride to its longest point. Note the
grease fitting at area B.
(g) Use an automobile grease gun with red lithium grease. Apply the grease
to the zerk fitting on the product.
(h) Put the cover back into place, pushing inward at step 3 and downward at
step 4, as shown below. Note that point A provides the best contact surface
on the lubrication hole cover.
(d)
(c)
(b)
(a)
(h)
(g)
(f)
(e)
