Stride Motor:
STEP 1. Remove the cap on the stride support assembly. First press in (A), then
push up
, and pull out
.
STEP 2. At the startup banner, simultaneously press the following three buttons:
stride length up (B), stride length down (C), interval (D). The message
"FILLING WITH LUBRICANT" appears. Wait for the stride position to adjust
automatically.
STEP 3. Attach the tube end of the grease gun to the valve in the stride motor
mechanism. Squeeze the lubrication gun trigger. After the grease has been
discharged into the stride motor mechanism, disconnect the tube from the
valve.
STEP 4. Press the STOP button as shown.
STEP 5. Put the cap on the stride support assembly back into position. Hold it in
place (G), push in
, and push down
.
STEP 1
STEP 2
3
STEP
STEP 4
STEP 5
24
PDF created with pdfFactory Pro trial version
www.pdffactory.com
