SportsArt Fitness DF-106, Manual

Page: 20 / 44

Before applying weight plate stickers, please wipe the area clean, and clean your hands
before proceeding to the next step.
Note: Press the sticker in place to ensure good contact on the weight plate.
3-1. Align and tape the cardboard to the upper left corner of the weight stack (6,7).
3-2. Peel off the top half of the weight sticker (8) backing. Note: leave the clear outside
margin in place on the sticker. Don't peel off the margin.
3-3. Align the sticker (8) with the right side of the cardboard and the top of the weight
stack. Then apply the sticker.
3-4. Press the numbered part of the sticker in place while you peel off the clear margin
of the sticker.
3-5. Follow steps 3-2~3-4 to apply sticker (9) to the lower part of the weight stack.
3-6. When the stickers are in place, peel off the cardboard.
-19-