33
OPERATION
user Preferences and component Versions
Basic settings determine units of measure and show total distance and time,
along with display and drive board program version numbers. To access this
information, at the startup banner screen, hold the CHANGE DISPLAY key for
two seconds.
uNITS
The display will show “UNIT – MILE” or “UNIT – KM” depending on the original
distance unit setting. Press ▲/▼ keys to toggle between the two settings. When
your preference appears, press the ENTER key to make your selection.
PROGRAM TIME LIMIT
The display will show “ TIME LIMIT - YES” or “TIME LIMIT - NO”, press ▲/▼ key
to turn this function On/Off. Press ENTER to make your selection. When “YES”
is selected, it will prompt the message of “TIME - XX:00” for you to set the time
limit. Setting range is from 5:00 to 60:00, with a default value of 30:00. Press
▲/▼ key or numeric keypads (0-9) to adjust the value. Press ENTER to confirm
the setting.
LANGuAGE
a. The display will show the current country selected, such as “US”.
Note: After 4 seconds, it will display “XX MILE H>H” or “XX KM H>H”
(XX represents the country code)
b. Press ▲/▼ keys to change the country.
c. Press the ENTER key to confirm the selection.
TOTAL DISTANcE
According to the speed unit setting, total distance will appear as either “DIST –
XXXXXX MILE” or “DIST – XXXXXX KM”, where XXXXXX represents a num-
ber. Press the ENTER key to view total time.
TOTAL TIME
Total time of use will appear as “TIME – XXXXXX HOUR”, where XXXXXX
represents a number. Press the ENTER key to view the product serial number.
PRODucT SERIAL NuMBER
The product serial number will appear as “S/N - XXXXXXX”. Press ENTER key
to view display program version.
DISPLAy PROGRAM VERSION
The display program version will appear as “CTL SA_5 – XX”, where XX rep-
resents either letters or numbers. Press the ENTER key to view the drive board
program version.
DRIVE BOARD PROGRAM VERSION
The drive board program version will appear as “DRV C575_SG - XX”, where
XX represents either a letter or a number. Press the ENTER key to finish the
review and return to Banner mode.
You may press and hold STOP key at anytime during this process to resent the
console and back to Banner state.