MAINTENANCE
The launchers are water resistant but not waterproof. Do not use
them in very wet conditions. Light rain may be tolerated for a short
period.
Never store a dummy on the launchers spigot as it will seize onto the
spigot.
Always store the launcher in somewhere warm and dry if it has been
used in moist conditions ensure it dries fully before storing.
Periodically open the launcher head and without a blank in cock the
launcher then Spray a very small quantity of Sporting Saint Dummy
Launcher Lubricant Spray down the firing pin hole.
Never spray oil
down the hole the blank goes in
. This will cause misfires. Clean
the .22 chamber every so often with a .22 cleaning brush.
Available in The Sporting Saint Dummy Launcher Care Pack.
Keep the spigot clean at all times, wipe with a baby wipe or similar
to remove burn powder residue. Change the seal if it looks perished
or worn as this will greatly affect dummy launching distance.
Check the launcher out before every use. If something seems wrong
or loose refrain from using the launcher until the problem is
addressed.
Insert Blank, Close the Launcher Head Section
Turn on the Launchers main switch