1.800.732.0144
SPORTDOG.COM
10
11
GE
TTI
NG
S
TA
RTE
D
GE
TTI
NG
S
TA
RTE
D
OPERATE THE TEK SERIES 1.5
The following terms are used throughout this Operating Guide:
SELECT: Move the highlighted area on the screen up, down, left, or right with the respective arrow keys on the
Menu Selection Pad to select individual menu items. A selected item is highlighted in orange.
BACK: Press the BACK button on the top right side of the Handheld Device to go to the previous menu.
FIELD: The location on a page where data can be entered.
ENTER: Press the Tracking/Training Toggle Button in a text entry field to select a highlighted character.
STEP::01
PREPARE THE GPS COLLAR / GPS E-COLLAR MODULE
YOU MUST COMPLETE THESE STEPS PRIOR TO USING THIS DEVICE FOR THE FIRST TIME.
TO CHARGE THE GPS COLLAR / GPS E-COLLAR MODULE
1. Attach the supplied Charge Cradle so that the SportDOG
®
logo on
the Charge Cradle covers the logo on the GPS Collar.
2. Connect the appropriate charger connector to the charging jack
as shown.
3. Plug the charger into a standard 120/240-volt AC wall outlet.
4. Charge the GPS Collar for 4 hours for the first charge and every
charge thereafter. It is not harmful to let the unit charge more
than 4 hours.
5. When charging is complete, as indicated by the Receiver Indicator
Light flashing green, remove the Charge Cradle.
NOTE: Approximate battery life between charges is 24 hours (at the 3
second update rate) depending on the frequency of use.
TO TURN THE GPS COLLAR/E-COLLAR MODULE ON
Press the On/Off Button and release when the Receiver Indicator Light
comes on green and beeps.
TO TURN THE GPS COLLAR/E-COLLAR MODULE OFF
Press and hold the On/Off Button until the Receiver Indicator Light comes on solid red and the GPS Collar beeps
for 2 seconds. To extend the battery life between charging cycles, turn off the GPS Collar when it is not in use.
TEST LIGHT TOOL INSTRUCTIONS
1. Turn the GPS E-Collar Module on.
2. Hold the Test Light Tool Contacts to the Contact Points.
3. Press a Static Stimulation Button on the Handheld Device.
4. The Test Light will flash.
NOTE: At higher static stimulation levels, the Test Light will flash brighter.
5. Turn the GPS E-Collar Module off.
NOTE: If the Test Light does not flash, recharge the battery and re-test. If the Test
Light still does not flash, contact the Customer Care Center.
GPS COLLAR RECEIVER INDICATOR LIGHT
OPERATIONAL MODE
LIGHT COLOR
LIGHT FUNCTION
BATTERY
STATUS
SPEAKER FUNCTION
Unit is turned on via
On/Off Button
Green
Light is solid
in color during
beep sequence
Good
N/A
Red
Low
Unit is turned off via
On/Off Button
Red
Light is solid
in color during
beep sequence
N/A
N/A
Unit is on
Green
Single blink every
3 seconds
Good
N/A
Red
Low*
Unit is in pairing mode
Amber
Light is solid
in color
N/A
N/A
Unit is charging
Green
Light is solid
in color
N/A
N/A
Unit is charged
Green
Light flashes
N/A
N/A
Unit is delivering
continuous, momentary,
rising, or programmable
static stimulation
Red
Light is solid
in color while
delivering static
stimulation
N/A
N/A
Unit is delivering
tone stimulation
N/A
N/A
N/A
Unit will beep
Unit is delivering
vibration stimulation
N/A
N/A
N/A
N/A
Unit has attained
GPS lock**
Green
Single blink every
3 seconds
Good
N/A
Red
Low
Unit has lost GPS lock
Green
Double blink every
3 seconds
Good
N/A
Red
Low
* Update rate automatically adjusts to 25 seconds.
** Before the GPS Collar can send location information to the Handheld Device, it must acquire GPS lock. To
acquire GPS lock, go outdoors to an open area with a clear view of the sky (see page 18).
