background image

11

WWW.SPORTDOG.COM

STEP::06

MATCH THE COLLAR RECEIVER AND REMOTE TRANSMITTER

To match the Collar Receiver to work with a new Remote Transmitter or to reprogram a new Collar Receiver to 

work with your existing Remote Transmitter:
1.  Turn off the Collar Receiver.
2.  Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off after 4-5 seconds. If 

the On/Off Button is released too early, the Receiver Indicator Light will begin flashing as normal. If this occurs, 

start over from Step 

1.

3.  After the Receiver Indicator Light has turned off, release the On/Off Button. 
4.  Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. 

Once the Receiver Indicator Light has flashed 5 times, the Collar Receiver has been matched and will begin 

flashing as normal. If the Receiver Indicator Light does not flash 5 times, start over from Step 

1.

STEP::07

PROGRAM THE SYSTEM FOR TWO OR THREE-DOG OPERATION

SportDOG

®

 Add-A-Dog

®

 Collar Receiver(s) must be purchased to train additional dogs. 

Please refer below for 

compatible Add-A-Dog Collar Receivers for these systems.
1.  Program the Remote Transmitter to mode 3 or 4 (see page 10). 
2.  Program the first Collar Receiver.
 

A. Turn off the Collar Receiver. 

 

B. Press and hold the On/Off Button. The Receiver Indicator Light will come on, then turn off in 4-5 seconds. If the On/Off  

    Button is released too early, the Receiver Indicator Light will begin its normal flashing. If this  occurs, start over and  

    repeat from 

A.

 

C.  After the Receiver Indicator Light has turned off, release the On/Off Button. 

 

D. Press and hold the Upper Button on the Remote Transmitter until the Receiver Indicator Light flashes 5 times. If the  

    Receiver Indicator Light does not flash 5 times, start over and repeat from 

A

3.  Program the second Collar Receiver using 

A through D above, but using the Lower Button in place of the 

Upper Button. 

4.  Program the third Collar Receiver using 

A through D above, but using the Side Button in place of the Upper Button.

ADD-A-DOG MODEL

SDR-AF / SDR-AXF

Original Collar Receiver for: SD-425X & SD-825X

SDR-AS / SDR-AXS

Original Collar Receiver for: SD-425XS

SDR-AC / SDR-AXC

Original Collar Receiver for: SD-425XCAMO

SDR-A / SDR-AX

Original Collar Receiver for: SD-1225X, SD-1825X & SD-2525

SDR-AW / SDR-AXW

Original Collar Receiver for: SD-1825XCAMO

SDR-AH

Original Collar Receiver for: SD-3225

SDR-AB

Original Collar Receiver for: SD-1875

Summary of Contents for SD-1225X

















Reviews: