sportArt G575R, Owner'S Manual

Page: 31 / 47

31
OPERATION User Preferences and Component Versions
Basic settings determine units of measure and show total distance and time,
along with display and drive board program version numbers. To access this
information, at the startup banner screen, hold the CHANGE DISPLAY key for
two seconds.
UNITS
The display will show “UNIT – MILE” or “UNIT – KM” depending on the original
distance unit setting. Press ▲/▼ keys to toggle between the two settings. When
your preference appears, press the ENTER key to make your selection.
PROGRAM TIME LIMIT
The display will show “ TIME LIMIT - YES” or “TIME LIMIT - NO”, press ▲/▼ key
to turn this function On/Off. Press ENTER to make your selection. When “YES”
is selected, it will prompt the message of “TIME - XX:00” for you to set the time
limit. Setting range is from 5:00 to 60:00, with a default value of 30:00. Press
▲/▼ key or numeric keypads (0-9) to adjust the value. Press ENTER to confirm
the setting.
LANGUAGE
The display will show the current country code selected twice, such as “US”.
After that, it will display “XX MILE H>H” or “XX KM H>H” (XX represents the
country code). Press ▲/▼ key to change the country code. Press ENTER to
confirm the selection.
TOTAL DISTANCE
According to the speed unit setting, total distance will appear as either “DIST
– XXXXXX MILE” or “DIST – XXXXXX KM”, where XXXXXX represents a
number. Press the ENTER key to view total time.
TOTAL TIME
Total time of use will appear as “TIME – XXXXXX HOUR”, where XXXXXX
represents a number. Press the ENTER key to view the display program version..
WATT HOURS PRODUCED
Total energy production will appear as “WATTS - XXXX.XX KWH”. Note that the
units of measure are kilowatt hours. Press the ENTER key to proceed to view the
display board version.
DISPLAy PROGRAM VERSION
The display program version will appear as “CTL SA_5 – XX”, where XX
represents either letters or numbers. Press the ENTER key to view the micro
inverter drive board program version.
MICRO INVERTER DRIVE BOARD PROGRAM VERSION
The micro inverter drive board program version will appear as “DRV MI - XX-
YYYY”, where XX and YYYY represent either a letter or a number. Press the
ENTER key to finish the review and return to Banner mode.
You may press and hold STOP key at anytime during this process to resent the
console and back to Banner state.