background image

Other item   

                                                                  

 

       

 

  Model no.:    G575R 

        Item: 

 

 

Language setting 

     

Description:     

How to set up the language preference, such as German, French… 

Method:    

1. Press <CHANGE DISPLAY> for 3 seconds to enter user preference and setting mode. Continuing pressing <ENTER
> key, the display will show “UNIT-KPH, MPH;TIME LITMIT;ZZZ TIME-XXMIN”…until the display shows ”GERMAN ”or 
“ 0  MILE H_H” for language setting. 
 
0,1,2,3…represents country language code, see below. Press <WORKOUT LEVEL<▲>/<▼> to select the desired 
language, press <ENTER> to confirm. 

 

                 

 

2.Country language code 

                        GERMAN       

     O  KM   H_H  

                        FRENCH       

     1  KM   H_H 

                        POLISH        

     2  KM   H_H 

         

 

 

 

SPAINLISH     

     3  KM   H_H 

                        JAPANESE     

     5  KM   H_H   

                        US. ENGLISH   

     6  MILE  H_H 

                        UK. ENGLISH    

   

10  KM   H_H 

                        SWEDISH       

   

11  KM   H_H 

 

 
 
 
 
 
 

 
 

3-19-1 

Summary of Contents for G575R





















































Reviews: