Spon NAS-8530, User Manual

Page: 11 / 20

IP Paging Microphone User Manual
9
the factory default device NO is 1
Terminal IP
Terminal IP address and port, the factory default IP address is 192.168.1.101
Note
：
It can`t revise except with the special situation
（
The default is 2046
）
Subnet mask The subnet mask of the terminal
Default gateway The network gateway of the terminal
Preferred server
IP
Set the IP address of preferred server, the factory defaults is 192.168.1.13
The server is a bridge to communicate with other devices, and has the right to control
devices, VOD, and broadcast, etc.
Alternate server
IP
Se the IP address of Preferred server, the factory defaults is 192.168.1.14
Login server
mode
The device can log onto the server in either UDP or TCP. If the corresponding server
supports both UDP and TCP communication, UDP is used by default.
Server Parameters
Enter the settings of "system parameters" and the corresponding parameters list.
Intercom input
volume
Terminal volume adjustment, range 0~15
Intercom output
volume
Terminal volume adjustment,range 0~15
Intercom sampling
rate
Set intercom sampling rate, 8K or 22K for optional, the defaults is 8K.
Intercom ADPCM
coding
Set whether intercom ADPCM encoding is enabled