89
Spohn & Burkhardt
5.7. Adjusting footrest
Crushing hazard!
There is a crushing hazard between the moving parts while adjusting the footrest. .
Danger!
The pins must be securely positioned in the slots after the adjustment of the footrest.
Note
The footrest can only be adjusted from the front of the empty control stand.
Both hands are required to adjust the footrest.
Figure 40.
5
a
b
5.1
5.1
5.2
c
d
5.2
Adjusting footrest
Adjust the height of the footrest (
5
) as follows:
1. Raise the footrest (
5
) using both hands and pull the footrest (
5
) forward toward you (
a
).
2. Move the footrest (
5
) to the required height; at the position of a slot (
5.1
) (
b
).
3. Push the footrest (
5
) and the pins (
5.2
) back into the slot (
5.1
) (
c
) to the stop.
4. Lower the footrest (
5
) at the front until the footrest (
5
) is in contact and the pins (
5.2
) are securely
engaged in the guide (
d
).
Summary of Contents for SV1C Series
