Data di emissione:
Luglio, 2013
Revisione:
1
Pag. :
6/15
ELECTRONIC CONNECTION AND MACHINE START UP
Fill the bowl with the product carefully
mixed;
Position the tap on the bowl in order to
have it well inserted along all the
perimeter;
Join each power supplier connector to
its lid;
Connect the plug G of each feeder to
electricity mains, the kit is now ready to
work;
Switch the kit on by using the main
switch M located in the upper part of
the lid;
The kit will automatically start to fill the
bowl, till the reaching of the level fixed
by the probes.
The tap is provided with a security
micro that avoids the functioning
both if the tap is lifted during the
charging phase and if the tap is not
well positioned on the bowl before
starting it.
SIGNALLING
In case the product finishes the
autofill kit is equipped with a system
of acoustic and visual signals: the
frontal LED starts flashing and
uttering and, at the same time, an
acoustic warning signal.
In case the level probes are not working properly and the product reaches the short security
probe, the LED will turn on and the lid will utter an acoustic warning signal until the machine
will be switched off and the level issue will be solved.
I
H
G
