background image

 

 2 

 

 

Spitwater Australia is proudly Australian owned and operated since 1983. Our promise is to provide our 
customers with superior quality high pressure cleaners built to the highest of standards that will see many 
years of reliable service. 
The Spitwater range of high pressure cleaners has been designed to give safe, efficient and dependable 
service when the correct operating and safety instructions are followed and proper attention is given to all 
required maintenance procedures in order to maintain the unit in peak operating condition. 
This manual provides the up to date information necessary for the user to operate the unit and carry out 
regular inspection and maintenance. 
Please note that the information given within this manual may be subject to revision in compliance with 
Spiwater Australia’s policy of continual improvement. 
Spitwater high pressure cleaners should only be used in the manner and purpose for which they

 

were intended 

and in accordance with the recommendations and safety precautions detailed in this manual.  
All Spitwater high pressure cleaners undergo rigorous safety and operational tests before being dispatched 
into the market, however it is still imperative that prior to use, all operators have read and understood all 
information and instructions provided and are aware of possible hazards. 

 
 
 

Spitwater high pressure cleaners are specifically designed to solve all problems relating to washing, 
degreasing, descaling and disinfecting in a wide range of commercial and industrial situations. Some examples 
of applications are in the cleaning, building, transport, light and heavy manufacturing and primary industries. 

 
 
 

Spitwater has an extensive range of spare parts and accessories to suit all your cleaning needs. For spare 
parts, accessories and service please contact 

1800 SPITWATER (1800 774 892)

 and to view Spitwater's 

extensive range of high pressure cleaners online visit 

www.spitwater.com.au 

For international spare parts, accessories and service please contact 

[email protected]

 

 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

INTRODUCTION 

GENERAL DESCRIPTION & INTENDED USE 

SPARE PARTS, ACCESSORIES AND AFTER SALES SERVICE 

Summary of Contents for SHW78
























Reviews: