8
L-L 283.01-SW
9.
TRANSPORT
•
Disconnect the unit from the power supply and allowe it to cool off before moving
between work areas.
•
Always use the handle to lift and move the unit.
•
If transporting the unit make sure it is appropriatly strapped to avoid hazards.
10. MAINTENANCE AND SERVICE
•
The heater must be checked that it is safe and in proper working order
before putting into service and before every use. If the unit is damaged do
not use it.
•
Always disconnect the unit from the power supply and allow it to cool off
before carrying out any inspection, service task or disassembling any part
of the heater.
•
Never carry out any maintenance work not expressly outlined in this booklet and
never make any modifications to this unit.
•
Never tamper with any settings of the unit (sealed or unsealed) and make sure that a
Spitwater authorized service agent carries out all servicing as required as this usually
include checking the correct functioning and setting of all safety devices as well as the
correct combustion of the unit.
•
Always use original Spitwater spare parts when parts replacements are required.
•
Inspect the unit each day before use. Follow “Daily inspection check list” guide
Table-
B
in the Maintenance section.
•
Service the unit regularly based on its usage. Follow “Usage vs Service frequency”
Table
(Table-A)
in the MAINTENANCE section. Always use a Spitwater authorized
service agent where requested to.
•
Failure to follow the maintenance guidelines in this booklet releases Spitwater from
any responsibility in reference to injuries and damages to both persons and goods
and may also render any warranty given with the unit void.
ASSEMBLY, INSTALLATION, OPERATING AND STORAGE INSTRUCTIONS
INSTALLATION INSTRUCTIONS
Warning
All of the operations described in this section must be performed by skilled
personnel only.
POWER CONNECTIONS
Warning
Never attempt to switch the heater on or off by connecting the room thermostat
(or other control devices) to the electrical power line.
Installation and connection of room thermostat are described in the specific instructions
enclosed. The electrical diagram in this manual shows only the electrical connection of the
accessory to the existing electrical system of the heater.
Warning
Do not connect any air distribution hose: this will cause a severe fire hazard!
