background image

L-L 283.01-SW 

DESCRIPTION OF SYMBOLS 

 

The following symbols are used throughout this instruction booklet in order to mark important 

paragraphs or sections that are due particular attention. Their meaning is listed next to them for 

your attention. 

 

 

 

 

 

 

 

 

 

 

WARNING 

Failure to follow 

instruction could 

result in injury 

or death 

 

WARNING 

Failure to follow 

instruction could 

result in damage to 

machine 

 

These are tips 

and instructions 

to ensure safe 

and proper 

operation 

 

The following symbols are used on the machine in order to warn user of potential injury if not 

cautious.  Their meaning is listed next to them for your attention. 

 

 

WARNING 

Hot surface 

Do not touch, 

will result in 

injury 

 

WARNING 

Electric shock 

Disconnect power 

before removing 

cover 

 

 

 

IMPORTANT SAFETY INSTRUCTIONS AND PRECAUTIONS 

WARNING:  

This heater shall only be used by persons instructed in its use and who have 

been authorized to do so. Before using this heater please pay attention to the 

following safety warnings as failure to do so could result in serious injury or 

even death. 

 

 

SAFETY LABELS 

 

 

Always pay attention to the safety instructions provided on each label. Do not alter or 

remove safety labels 

 

 

Summary of Contents for JETFIRE J20A



















Reviews: