4
&RQ¿UPDWLRQGHFODUDWLRQ
We declare in sole responsibility that the product type Spit SD 16E referred to in this
declaration conforms to the following standards and further normative documents.
We declare under our sole responsibility that this product is in conformity with the
following standards or standardization documents:
EN 60 745, EN 55 014, EN 61 000 according to the regulations 2006/95/EC,
2004/108/EC,2006/42/EC
Paul van Beek
Ruben Bernaert
General Manager
Product Manager
ITW Heger
Industriepark
Cardijnlaan 3
BE-8600 Diksmuide
Belgium
FUNCTIONAL DESCRIPTION
Electrical connection
The SD 16E is designed according to protective class II.
Prior to putting the tool into operation, check the mains voltage for conformity with the
requirements of the tool’s nameplate.
Voltage variations b 6 % and – 10 % are permissible.
The tool includes a start-up speed limiter to prevent fast expulsion fuses from
unindented responding.
2QO\XVHH[WHQVLRQFDEOHVZLWKDVXI¿FLHQWFURVVVHFWLRQ$FURVVVHFWLRQZKLFKLVWRR
small could cause a considerable drop in performance and an overheating of machine
and cable.
Recommended minimum cross sections and maximum cable lengths
Mains voltage
230 V
Cross section in mm
2
1.5
2.5
Maximum cable length
50 m
80 m