background image

MAINTENANCE 

 SPT17/20X  86037300  01/24/07 

4-1

 

SCRUB BRUSHES  

 

NOTE:  All original equipment brushes are 
equipped with “Perform Alert

©

”.  This feature will 

tell the operator when it is time to replace the 
scrub brushes.  “Perform Alert

©

” brushes have 

pre-trimmed bright yellow tufts to indicate the 
length of a worn out brush.  When the tufts in the 
scrub brush wear to a length equal to the yellow 
tufts, the scrub brushes should be replaced.   
 

There are five different types of brushes available 
to cover applications from cleaning heavily soiled 
floors to polishing.  A pad driver is also available to 
take advantage of the many cleaning pads on the 
market and further add to the flexibility of the Spirit.  
Please refer to the following to assist in selecting 
the proper brush or pad for the work at hand. 
 

UNCOATED FLOORS 
 

Aggressive Grit 

is a nylon fiber impregnated with 

silicone carbide grit.  It grinds away stain, soil, and 
removes surface material. 
 

Mild Grit

 is a less aggressive silicone carbide grit 

suitable for cleaning medium soil conditions.  
Advantages are faster ground speed than nylon 
bristles on light solid applications. 
 

Nylon

 is a general-purpose scrub brush with stiff 

bristles.  Polypropylene works well for maintaining 
concrete, wood and tile floors. 
 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 
FINISHED FLOORS 

 
Nylon Polish

 is the softest brush.  It will gently 

clean finished tile or terrazzo floors without 
removing floor finish or floor material.  Used for 
washing highly polished or burnished floors. 
 

Nylon

 bristles are used in a variety of applications 

on coated or uncoated surfaces. 
 

White Pads 

(Polishing) are used for dry polishing 

to achieve a high-gloss appearance, or surface 
washing on highly polished or burnished floors. 
 

Red Pads 

(Buffing) are used for light-duty 

scrubbing.  When used with a mild detergent they 
will provide surface cleaning without removing the 
finish. 

 
Blue Pads 

(Scrubbing) are used for heavy-duty 

scrubbing and light stripping.  The blue pads 
remove less finish than brown stripping pads, yet 
will remove black marks, stains and dirt. 
 

Brown Pads 

(Stripping) are used for easy and 

complete removal of old floor waxes/finishes.  
They will quickly remove ground in dirt, black heel 
marks, and spills.  When used with the proper 
stripper, this pad leaves the floor clean and ready 
for finishing. 
 
The scrub brushes should be checked before each 
days work for wire, string, wear and damage.  The 
scrub brushes should be replaced if brush bristles 
are missing or if yellow Perform Alert 

©

 indicates 

minimum brush length. 
 
 
 

Summary of Contents for SPT17 10090370




























Reviews: