Spirit KING-416, Instruction Manual

Page: 7 / 24

17-18 +48V
80Hz
0
+60 0
0
+20 -20
0
+15 -15
0
+15 -15
0
+15 -15
0
+15 -15
GAIN
MIC
LINE
TRIM
TREBLE
12KHz
HI MID
3KHz
LO MID
300Hz
BASS
80Hz
EQ
ON
OFF
The KING stereo input channel is equipped with an XLR input which can be
used for Mic or Line level signals up to +22dBu. Two additional1/4 inch
jack sockets, provide an input for Stereo- or Mono Line level signals up to
+28dBu.The stereo channel features the same hi-value microphone pre-
amp as the mono channel. Because the stereo input channel uses
independet circuits for Mic and Stereo Line , it is possible to have all inputs
connected at the same time, without interference.
4. The LINE TRIM control gives continuous adjustment of the stereo input
amplifier gain from -20dB to + 20dB for the Stereo Line input.
6. The HI MID control gives continuous adjustment of boost and cut from
-15dB to +15dB with a 0dB centre detent. The HI MID equaliser acts on
3kHz with a 1.4 octaves bandwith.
1. The +48V switch for each channel is positioned at the rear panel of the
console. It co48 V phantom power to the XLR input connector.
This is suitable for a condenser microphone or DI Box.
2. The MIC GAIN control gives continuous adjustment of the input amplifier
gain from 0dB to + 60dB for the Mic input.
3. The HI PASS switch connects the the 80Hz hi-pass-filter in the input channel
signal path right after the mic input amplifier.
5. The TREBLE control gives continuous adjustment of boost and cut from
-15dB to - 15dB with a 0dB centre detent. The treble equaliser acts on
12kHz.
7. The LO MID control gives continuous adjustment of boost and cut from
-15dB to+15dB with a 0dB centre detent. The LO MID equaliser acts on
300Hz with a 1.4 octaves bandwith.
9. The EQ switch connects the equaliser in the input channel signal Path.
8. The BASS control gives continuous adjustment of boost and cut from
-15dB to +15dB with a 0dB centre detent. The bass equaliser acts on 80Hz.
1
2
3
4
5
6
7
8
9
4
STEREO INPUT CHANNEL