72
UNITS
Purpose of this setting is to change from ENGLISH (Imperial) to METRIC distance calculation.
•
Press PLAY KEY to change setting.
•
Default setting is ENGLISH.
o
For the MILES FOR LIVES program, distance goal will be ENGLISH Only.
o
SPD AVG and SPD PEAK in Workout Results will Only display MPH.
•
Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.
BRAKE TEST
Purpose of this setting is to test the magnetic resistance system.
•
Press PLAY KEY to enter BRAKE TEST.
•
MOTOR TEST AUTO
is displayed.
o
Press + KEY or - KEY to switch to MOTOR MANUAL and LIMIT SENSOR and EXIT.
•
Press PLAY KEY.
•
LEVEL TO 20 displays, Press PLAY KEY.
o
Auto-run motor in a loop from L-1 to L-20 and back to L-1.
o
Press PLAY KEY to end, revert to BRAKE TEST.
•
MOTOR TEST MANUAL.
•
Use + KEY and – KEY to move motor.
•
Press PLAY KEY to end, revert to BRAKE TEST.
o
ENCODER displays. This is ENCODER count or digital value.
o
Upper Right of display displays LIMIT SENSOR CONDITION.
1 = HOME
2 = ACTIVE RANGE
3 = END
o
Lower display displays Encoder Set Value.
•
LIMIT SENSOR
•
S1 ON, S2 OFF
•
S1 is Home Position
•
S2 is End Point
•
EXIT
will revert to setting screen.
•
Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.
Summary of Contents for JB 950
Page 36: ...36 EXPLOSIONSZEICHNUNG ...
Page 78: ...78 EXPLODED VIEW DIAGRAM ...
