58
Miles For Lives
Miles For Lives is a distance program that can be used as a charity event or for a speed or endurance
competition. The distance can be set from as low as 5 miles to 300 miles. The WORKOUT SUMMARY
will display riders Time and Distance on a single screen to compared with the peloton.
Press PLAY and – KEY simultaneously to enter MILES FOR LIVES program.
- Screen displays DISTANCE and 5.0 MILES flashes.
- Use + KEY to adjust distance from to 5.0 to 300 MILES.
NOTE:
DISTANCE measurement for MILES FOR LIVES program displays in
MIL.ES ONLY and not in kilometers when metric units are selected in
MAINTENANCE MODE.
•
Press PLAY KEY to begin program
- Press + or – KEY on either Forward Control Pad or handlebar ends to adjust resistance.
- When distance goal is completed, console displays GREAT RIDE
- The display will then alternate between GREAT RIDE and data screen.
- Press PLAY KEY to enter WORKOUT RESULTS followed by Summary Data
o
TIME in minutes
o
DISTANCE in miles
o
WATT AVG
o
WATT PEAK
o
SPEED AVG in MPH
o
SPEED Peak in MPH
o
HR AVG
o
HR PEAK
o
RPM AVG
o
RPM PEAK
•
Pr or – KEY will scroll through Summary Data screens.
•
Summary Data screens will automatically scroll every 5 seconds if + or – KEYS are NOT
pressed.
•
Pressing PLAY KEY will reset display and revert to WARM UP Mode.
NOTE:
If the LAP feature is ENABLED in MAINTENANCE MODE, pressing the PLAY KEY during ANY
program will start and record a LAP and will continue as a LAP Program
- Refer to the LAP PROGRAM for instructions on using LAPs.
- To prevent the LAP feature set to DISABLE in MAINTENANCE MODE
Summary of Contents for JB 950
Page 36: ...36 EXPLOSIONSZEICHNUNG ...
Page 78: ...78 EXPLODED VIEW DIAGRAM ...
