70
Maintenance Mode
The maintenance mode contains sensitive settings for your device.
You should first read and understand these instructions before you make amendments.
In case of doubt, contact the customer service!
MAINTENANCE MODE offers the following bike settings:
•
KEY TEST
•
DISPLAY TEST
•
ODOMETER
•
UNITS – ENGLISH/METRIC
•
BRAKE TEST
•
RPM SENSOR
•
UPDATE SOFTWARE
•
LED BRIGHTNESS
•
ANT + ID SETUP
•
DEMO MODE
•
USER OPTIONS (already described earlier in this manual)
•
CALIBRATION
ENTERING MAINTENACE MODE
- Simultaneously press and hold + KEY, - KEY and PLAY KEY on Forward Control Pad for 3
seconds.
- Console displays MAINTENANCE MODE.
NOTE:
If console displays CONSOLE RESET, instead of MAINTENANCE MODE, then ALL 3 keys on
Forward Control Pad were possibly not pressed and held simultaneously or for enough time; attempt
action again.
- Upon entering MAINTENACE MODE.
•
Press PLAY KEY.
•
KEY TEST displays on console.
•
Press the + KEY to scroll through different screens until the desired screen displays.
•
Press PLAY KEY to enter displayed setting.
o
Once within setting, use + or – KEY adjust.
o
Press PLAY KEY to confirm and exit some but not all settings.
o
Press the + KEY to scroll through to another screen.
o
When done, RESET CONSOLE to exit MAINTENANCE MODE.
Summary of Contents for JB 950
Page 36: ...36 EXPLOSIONSZEICHNUNG ...
Page 78: ...78 EXPLODED VIEW DIAGRAM ...
