Spirit CT800ENT, Owner'S Manual

Page: 13 / 64

11
www.spiritfitness.com
HARDWARE FOR STEP 2
PART TYPE DESCRIPTION QTY
125 Flat Washer Ø3/8” × Ø25 × 2.0T 6
133 Split Washer Ø10 × 2T 6
151 Button Head Socket Bolt 3/8” × 3/4” 6
152 Socket Head Cap Bolt M8 × 12m/m 6
153 Flat Washer Ø8 × Ø16 × 2T 6
CT800ENT
STEP TWO
1. On the underside of the Console Support (No.5) is where
the Locking Plate Assembly (No. 3 & 4) can be attached.
Use 3 Socket Head Cap Bolts (No.152) and 3 Flat
Washers (No.153) on each side to secure.
2. Connect all cables with the correct pairing:
a. The Computer Cable (No. 53) with the Upper
Computer Cable (No.52) .
b. The
Ethernet Cable (No. 80)
with the
Upper Ethernet
Cable (No.79) .
c. The C-safe Cable (No. 82) with the Upper C-safe
Cable (No.81) .
d. The HDMI Cable (No. 84) with the Upper HDMI
Cable (No.83).
Note: Be careful not to pinch the wires and slide
them into the
Right Upright (No.9)
.
3. Gently slot the Console Support (No.5) into the Left/
Right Uprights (No.8 & 9) and secure with 3 Button Head
Socket Bolts (No.151), 3 Split Washers (No.133) , and
3 Flat Washers (No.125) on both sides using the Allen
Wrench (No.160) .