background image

Customer Service 1-888-707-1880 

 

                                                                               

  Dyaco Canada Inc. 2016 

Email: [email protected] 

             

 

20

   

HEART RATE PROGRAMS 

A word about Heart Rate: 

The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits of exercising 
comfortably. A great deal of this success has been promoted by the use of heart rate monitors. With the 
proper use of a heart rate monitor, many people find that their usual choice of exercise intensity was 
either too high or too low and exercise is much more enjoyable by maintaining their heart rate in the 
desired benefit range. 
 
To determine the benefit range in which you 
wish to train, you must first determine your 
Maximum Heart Rate. This can be 
accomplished by using the following formula: 
220 minus your age. This will give you the 
Maximum heart rate (MHR) for someone of 
your age. To determine the effective heart rate 
range for specific goals you simply calculate a 
percentage your MHR. Your Heart rate training 
zone is 50% to 90% of your maximum heart 
rate. 60% of your MHR is the zone that burns 
fat while 80% is for strengthening the cardio 
vascular system. This 60% to 80% is the zone 
to stay in for maximum benefit. 
 
For someone who is 40 years old their target 
heart rate zone is calculated: 
 
220 – 40 = 180 (maximum heart rate) 
180 x .6 = 108 beats per minute (60% of maximum) 
180 x .8 = 144 beats per minute (80% of maximum) 
 
So for a 40 year old the training zone would be 108 to 144 beats per minute. 
 
If you enter your age during programming the console will perform this calculation automatically. Entering 
your age is used for the Heart Rate control programs. After calculating your Maximum Heart Rate you can 
decide upon which goal you would like to pursue.   
 
The two most popular reasons for, or goals, of exercise are cardiovascular fitness (training for the heart 
and lungs) and weight control. The black columns on the chart above represent the Maximum Heart Rate 
for a person whose age is listed at the bottom of each column. The training heart rate, for either 
cardiovascular fitness or weight loss, is represented by two different lines that cut diagonally through the 
chart. A definition of the lines’ goal is in the bottom left-hand corner of the chart. If your goal is 
cardiovascular fitness or if it is weight loss, it can be achieved by training at 80% or 60%, respectively, of 
your Maximum Heart Rate on a schedule approved by your physician. Consult your physician before 
participating in any exercise program.   
 

90

Summary of Contents for CRS800









































Reviews: