background image

1

e

Glide 

Trainer

CG

800

Record Your Serial Number

Please record the serial number of this fitness product 
in the space provided below.

Serial Number

Register Your Purchase

The self-addressed product registration card must be completed in full and returned to Spirit  
Fitness. You can also go to https://www.spiritfitness.com/residentialwarrantyregistration.html 
to register online.

Thank you for your purchase of this quality group e•Glide Trainer from Spirit Fitness. Your new 
e•Glide Trainer was manufactured by one of the leading fitness manufacturers in the world and is 
backed by one of the most comprehensive warranties available. Through your dealer, Spirit Fitness 
will do all we can to make your ownership experience as pleasant as possible for many years 
to come. If not purchased direct from Spirit Fitness, the local dealership where you purchased 
this e•Glide Trainer is your administrator for all Spirit Fitness warranty and service needs. Their 
responsibility is to provide you with the technical knowledge and service personnel to make your 
experience more informed and any difficulties easier to remedy.

Please take a moment at this time to record the name of the dealer, their telephone number, and 
the date of purchase below to make any future, needed contact easy. We appreciate your sup-
port and we will always remember that you are the reason that we are in business. Please com-
plete and mail your registration card today and enjoy your new e•Glide Trainer.

Yours in Health,
Spirit Fitness

Congratulations on your new e•Glide Trainer and welcome to the Spirit Fitness family!

Name of Dealer
Dealer Phone #
Purchase Date

CG800_20110623

Pr
oduct R

egistr

ation

Summary of Contents for CG800 e-Glide



















Reviews: